Home / Knurling & CNC turning
Knurling & CNC turning
Knurled hardware and CNC turning, made in India.
Knurling is where precision meets touch. A crisp diamond pattern on a brass pull, a fine straight knurl on a lamp switch — it should look sharp and feel even under every finger. We produce knurled and turned parts on CNC lathes and VMCs across our partner network, in brass, stainless steel and aluminium.
Patterns
Knurls we produce.
Pitch, depth and pattern are set to your sample and planned to keep their definition after plating or PVD.
Diamond knurl
The classic cross-hatch, from coarse to fine pitch.
Straight knurl
Clean vertical lines for a modern, technical look.
Custom knurls
Banded, tapered and combined patterns made to your drawing.
Built to be touched
Checked like it matters.
Cabinet pulls, T-bars, door levers, knobs, bath fittings, lamp switches and bases. Knurled parts are plated, PVD-coated or left as natural brass to age with use — and every batch is checked against the approved sample.
- Pitch and depth checked against the sample
- Diameter and concentricity measured
- Burr-free edges, hand-inspected
- Finish consistency across the batch
FAQ
Questions buyers ask us.
Which materials can be knurled?
Brass, stainless steel, aluminium and mild steel are most common. Brass gives the crispest pattern.
Do knurls survive plating and PVD?
Yes. We plan the knurl depth so it keeps its definition after finishing.
Turned and checked
Precision you can measure.
Start a project
Tell us what you need. We’ll take it from there.
Share a drawing, a reference or simply the problem you’re facing. Reach us at vanditkhanna@nehneed.com or on WhatsApp at +91 98118 72171.
Follow the shop floor
Updates from the floor, every week.
Process reels, inspection notes and new work from our partner network — shared as it happens.